![]() ![]() System architecture supported: 32-bit and 64-bit TFT_UNLOCKTOOL_V3.1.1.2 TFT_MTK_Module_V3.2.Zip How to Use And Install TFT Unlocker Digital Tool However, the latest v3 version now added too many new ways to unlock the FRP lock and fix some bugs for better use. Here,e I share all about TFT Unlocker Digital Tool V3.1.1.2 and how you can easily set up and use it on your Windows computer. Read More:- Download Samsung FRP Hijacker Tool 2023 | Remove FRP Lockĭownload the TFT Unlocker Digital Tool Latest Version Reboot iDevice Normal Mode (Exit Recovery DFU) Test-Point Connect Reset MDM | Erase FRP Fixed ERASE FRP A11 A02S M11 M02S A01 A70 A71 There is no need for TestPoinT VOL + And VOL-Just Insert cable! Too many timeouts waiting for hardware (mmc0), system is too slow to load (>4min to login prompt)ĭd if=SPL of=/dev/mmcblk2boot0 seek=2 dd if=u-boot.img of=/dev/mmcblk2boot0 seek=138Ĭp /usr/lib/u-boot/rpi_arm64/u-boot.bin /boot/firmware/ vi /boot/firmware/config.txt: kernel=u-boot.binĭd if=u-boot-spl.bin of=/dev/XX seek=34 dd if=u-boot.Added ERASE FRP A10S A03S A02 A22 A12 A01 CORE Booting via serial console works wlan0 is found, but not eth0. Seems to boot fine, but built-in keyboard does not work. Network interfaces not detected.Ĭopied /usr/lib/u-boot/rpi_4/u-boot.bin to /boot/firmware and edited config.txt to match. Installed u-boot-menu as well.Ĭopied /usr/lib/u-boot/rpi_4/u-boot.bin to /boot/firmware and edited config.txt to match. Network interface not detected (used 3B+ DTB, 02W not yet available ☹)Ĭopied /usr/lib/u-boot/rpi_4/u-boot.bin to /boot/firmware and edited config.txt to match. Installed u-boot-menu as well.Ĭopied /usr/lib/u-boot/rpi_3/u-boot.bin to /boot/firmware and edited config.txt to match. Installed u-boot-menu as well.Ĭopied /usr/lib/u-boot/rpi_2/u-boot.bin to /boot/firmware and edited config.txt to match. U-boot-menu, debian-installer mini.iso (EFI)ĭd if=/usr/lib/u-boot/Mini-X/u-boot-sunxi-with-spl.bin of=/dev/XXX bs=1024 seek=8Ĭopied /usr/lib/u-boot/rpi/u-boot.bin to /boot/firmware and edited config.txt to match. Old unstable/testing/experimental versions: Gpu_freq=250 in config.txt for serial console Usb needs to be started to get sata (if usb powered) Dd if=u-boot-spl.bin of=/dev/XX seek=34 dd if=b of=/dev/XX seek=2082 ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |